TYPICAL PROPERTIES

• HARD AND DENSE COATING WITH EXCELLENT BONDING PROPERTIES.

• RESISTANT TO ABRASION, EROSION, SLIDING WEAR, AND FRETTING

• TEXTURE 150 MICRO INCHES (AS SPRAYED)

• POROSITY IS LESS THAN 1%

• BOND STRENGTH APPROXIMATELY 10,000 PSI

• MICRO HARDNESS DPH 300, MACRO  HARDNESS RC62-RC63

• OPERATING TEMPERATURE UP TO 500 DEGREES F.

RECOMMENDED COATING THICKNESS

• CCC 208-1 (.002”-.004”)

FOR HORNS WITH CLOSE TOLERANCES

• CCC 208-2 (.005”-.008”)

FOR HORNS WITH OPEN TOLERANCES

• CCC 208-3 (.012”)

THEN GROUND FLAT TO (.005”-.008”) FOR HORNS THAT REQUIRE A 125 OR FINER SURFACE FINISH AND MUST BE FLAT WITHIN .001”